Overview
The AMPS-24 is an intelligent, addressable power supply and battery charger designed to deliver reliable, filtered 24 VDC output for use with NOTIFIER’s NFS-3030 and NFS2-3030 Fire Alarm Control Panels (FACPs). Capable of operating in either FlashScan® or CLIP mode, the AMPS-24 provides enhanced power distribution, battery charging, and system supervision—all within a compact, enclosure-compatible form factor. It also serves as a primary power source for the NCA-2 Network Control Annunciator, making it a versatile component for large-scale fire protection systems.

AMPS-24 Addressable Power Supply NOTIFIER Fire Alarm Systems

High-Capacity Power Distribution

Up to three 24 VDC filtered, power-limited outputs

Provides dependable power for control panels, annunciators, and auxiliary devices

Secondary power auxiliary outputs: 24V @ 0.5A and 5V @ 0.15A
Selectable charging current supports batteries from 7 AH to 200 AH

Supervised charger for sealed lead-acid batteries

Integrated battery supervision and brownout detection
Fully addressable by NFS-3030 and NFS2-3030 FACPs

Operates in FlashScan® or CLIP protocol modes

Isolated Signaling Line Circuit (SLC) interface for robust communication
USB Type B connector for quick programming of installation parameters

Trouble bus input supports dry contact or open-collector signals

AC loss detection with configurable delay reporting

Compatible with multiple NOTIFIER cabinet models including CAB-4 Series, EQ Series, and BB battery backboxes
Genuine Compatibility: Works seamlessly with NOTIFIER’s ONYX® series and NCA-2 systems

Versatile Application: Suitable for powering fire panels, expansion modules, and annunciators

Professional Guidance: Expert support for installation, configuration, and battery sizing

Fast Fulfilment: Prompt shipping across India for critical project timelines

Post-Sale Support: Comprehensive assistance including AMC (Annual Maintenance Contract) services
Multi-Zone Fire Alarm Systems

High-Rise Residential and Commercial Buildings

Healthcare and Laboratory Facilities

Education and Institutional Campuses

Industrial and Utility Infrastructures
Primary Input: 110–120 VAC, 50/60 Hz, 5 A max

Main Output: 24VDC filtered, power-limited

Battery Charging Range: 7 AH to 200 AH (current-limited)

Auxiliary Outputs: 24V @ 0.5A and 5V @ 0.15A

Interface: Isolated SLC and USB Type B for setup

Installation: Mounts in CAB-4, EQ, BB-25, BB-100, or BB-200 enclosures

Wiring Size Support: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²)

Battery Fuse: 15 A, fast-acting
Additional SLC-compatible Detectors and Modules

Network Communication Interface Cards

Panel Expansion Enclosures

Backup Power Supplies