.png)
Manual Call Points Intelligent/Addressable Devices from Notifier by Honeywell.
- Maintenance personnel can open station for inspection and address setting without causing an alarm condition.
- Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm.
- Handle latches in down position and the word “ACTIVATED” appears to clearly indicate the station has been operated.
- Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm² wire).
- Can be surface mounted (with SB-10 or SB-I/O) or semi-flush mounted. Semi-flush mount to a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box.
- Smooth dual-action design.
- Meets ADAAG controls and operating mechanisms guidelines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force.
- Highly visible.
- Attractive shape and textured finish.
- Key reset.
- Includes Braille text on station handle.
- Optional trim ring (BG12TR).
- Meets UL 38, Standard for Manually Actuated Signaling Boxes.
- Up to 99 NBG-12LX stations per loop on CLIP protocol loops.
- Up to 159 NBG-12LX stations per loop on FlashScan® protocol loops.
- Dual-color LED blinks green to indicate normal on FlashScan® systems.
Manual Call Points Intelligent Addressable Devices
• NFX-MCP-GLASS: Flashscan Red Indoor flush mount manual call point with glass element • WCP-5A-R: Outdoor (IP67) addressable red manual call point with glass element. CLIP protocol • SR: Surface mount back box to suit manual call point • SG-1X10: Replacement glass manual call point element (pack of 10) • PS210: Resettable manual call point element • SC070: Replacement test keys for manual call point (pack of 10) • PS059: Breakable anti-tamper seal for manual call point fitted with clear hinged cover (pack of 5)